How To Draw A Funeral Casket Step By Step

Download Commodity

Download Article

If you're looking for the perfect fashion to spook pull a fast one on-or-treaters with your Halloween decorations, need a prop coffin for a theater production, or need a elementary bury for an actual burial, attempt building a plywood bury. It's unproblematic enough to make that you won't take to spend a ton of money, but durable and functional. Go along in heed that you'll need some basic knowledge of carpentry and power tools to cut the pieces of the coffin out of plywood and put it all together.

1
Gather your materials and tools to build the bury. Buy a whorl of shelf paper, 3 ³⁄₄ in (one.9 cm) 4 ft × 8 ft (ane.2 m × ii.4 m) sheets of plywood, 1.5 in (iii.8 cm) forest screws, and wood gum at a home comeback center. Brand sure you have a circular saw, an electric drill, a pencil, and a measuring record to mensurate and cut out the pieces and put them together.^[ane]
- If you don't have ability tools, you can rent them at a hardware store or habitation improvement center.
- If you desire a nicer-looking simple coffin for burial purposes, you could make it out of pine instead of plywood.
2
Describe the eye lines of a template on 2 pieces of shelf newspaper taped together. Draw ane 75.5 in (192 cm) straight line lengthwise down the middle of the shelf paper. Depict a 34 in (86 cm) perpendicular line 17 in (43 cm) down from the top of the get-go line.^[2]
- The resulting line volition be the shape of a cross. This will help y'all create the outline of the coffin.
- Shelf paper is newspaper used for lining shelves that comes in big rolls. Record 2 pieces together side-by-side to make a piece wide enough to create your template.
- Annotation that you can change the dimensions of the coffin by adjusting any of the measurements.
Tip: If you lot tin't observe shelf paper, you tin can use whatever other type of large paper that comes in rolls, such as butcher paper.

Advertisement
3
Create the outline of the coffin'south lid using the middle lines as guides. Depict a 24 in (61 cm) horizontal line at the tiptop of the cross shape and a 17 in (43 cm) horizontal line at the lesser. Create the side lines by cartoon straight lines to connect the ends of all the horizontal lines.^[3]
- Yous will now have the completed outline of your bury.
4
Make a 2nd template that is ³⁄_four in (1.nine cm) smaller for the base. Cutting out the beginning template and trace it onto another 2 pieces of shelf paper taped together. Measure out in ³⁄₄ in (ane.9 cm) all the mode effectually and draw the new, smaller outline in the centre. Cut this new template out as well.^[4]
- This will exist the template for the base of the coffin. It needs to be ³⁄₄ in (1.ix cm) smaller and then the sides tin can be screwed around it.
v
Create templates for the sides on 1 ft (0.30 m) broad strips of shelf paper. Measure and cut a 24 in (61 cm)-long past i ft (0.30 m)-wide piece for the top of the coffin and a 17 in (43 cm)-long by one ft (0.30 m)-wide piece for the bottom of the coffin. Make two 18 in (46 cm)-long by one ft (0.30 m)-broad pieces for the brusk sides and 2 59 in (150 cm)-long by 1 ft (0.30 m)-wide pieces for the long sides.^[v]
- This volition requite the coffin a depth of 1 ft (0.30 m). Feel free to make it shallower or deeper by using thinner or wider strips of shelf paper for the templates.
Advertisement

one
Utilise a circular saw to cut the base of the coffin out of plywood. Trace the base template onto a ^three⁄_four in (1.9 cm) 4 ft × viii ft (ane.2 m × ii.4 m) sheet of plywood. Clamp the plywood to a pair of sawhorses or a flat workbench and then the cut lines are hanging off the edge and cut out the base of the bury.^[6]
- Brand sure you are using the smaller of the 2 outline templates you made for the base or the sides won't fit properly around it.
2
Cut the sides out of plywood using a round saw. Cut a ^three⁄₄ in (1.9 cm) 4 ft × eight ft (one.ii m × 2.4 m) sheet of plywood into four 1 ft (0.30 g)-wide strips. Trace the side templates y'all made onto the strips and cut the 6 sides to the right lengths using a round saw.^[seven]
- You can go the plywood pre-cut into four strips at a habitation improvement store if y'all desire to save time.
- Keep in mind that you demand to mark the short and long sides of the coffin twice.
three
Cutting out the lid of the coffin with a round saw if y'all desire a lid. Use the outset outline template you made to trace the outline of the lid onto a 4 ft × 8 ft (1.2 m × ii.4 thou) sheet of plywood. Clamp the plywood to a apartment workbench or sawhorses then the cut lines are hanging off the border and employ your circular saw to cut out the outline of the lid.^[8]
- You don't have to cut out a lid if you lot want to make an open coffin as a ornament or prop. If you are planning to use it for burial, you need a lid.
four
Miter-cut the ends of the side pieces at the correct angles so they fit together. Miter-cut the top of the coffin and the 2 short sides that connect to it at 53-degree angles. Cut the brusque sides where they connect to the long sides at 76-degree angles and the long sides where they meet at 80-caste angles. Miter the bottoms of the long sides and the lesser slice at 49-degree angles.^[9]
- You can either utilise a power miter saw or set up the blade to different angles on your circular saw to make the cuts. If you use your circular saw, yous will demand to clamp the pieces to a flat work surface with the cutting lines hanging off. If you lot employ a power miter saw, y'all tin can secure the pieces in the built-in miter box to make the cuts.
- Even if you adjusted the measurements of the bury, use these angles for the mitered cuts.
Tip: Don't worry too much near how perfect the angles are if you're just planning to use the coffin as a Halloween ornamentation. Nobody is going to inspect the coffin closely enough to detect that the sides aren't perfectly mitered.

Advertizement

1
Lay the side pieces around the base of operations of the bury and dry-fit them. Put the base of the coffin on the footing or a large apartment piece of work surface and lay out the side pieces around information technology. Test-fit everything to brand sure all the sides fit correctly before yous offset attaching them.^[10]
- Yous can brand whatsoever adjustments to the angles cuts on the side pieces here if needed to get everything to fit together.
2
Attach all the sides with screws and woods glue. Put a thin bead of forest mucilage all the way around the edges of the coffin's base of operations and on the angled edges of the side pieces. Stand the sides up around the base, one-at-a-time, and employ an electrical drill to put a 1.5 in (three.eight cm) forest spiral in through the sides where they meet the edge of the base every 5 in (13 cm) or so. Screw the sides together where they meet once you lot have secured them all around the base of the bury.^[11]
- Don't worry about the exact number of screws you use and getting the spacing perfect. As long equally the sides experience deeply attached, it's fine.
Tip: If at that place are whatever cracks where the sides don't fit together perfectly, you can simply fill them in with wood filler to hide them.
3
Put the chapeau on using screws and forest glue or a piano hinge if y'all fabricated a lid. Attach the lid past putting a thin bead of wood mucilage forth the top edges of the sides and securing it in identify with 1.5 in (3.8 cm) wood screws if you don't desire a casket that opens. Adhere information technology with a 48 in (120 cm) pianoforte hinge to i of the long sides if you want the casket to open and close.^[12]
- If y'all want to give people a scare on Halloween, you tin can dress upwards and hide inside a bury with a chapeau attached by a pianoforte hinge, then pop out to affright trick-or-treaters or political party guests.
- If you're planning to utilize the coffin for burial, secure the lid in place afterward the deceased is inside it.
4

Add whatever finishing touches to the coffin that you lot want. Paint or stain the bury if you don't want to change the colour. Gum fabric, such every bit felt or velvet, to the within using wood gum or schoolhouse glue to requite information technology a more than polished look if yous desire people to see inside of it.^[13]

Advertisement

Add New Question

Question

How exercise I fit drinking glass to show a corpse's face?

Cut a hole in the lid. Employ paneling molding (information technology has a recessed lip) to trim out the glass. I actually would recommend lexan -- it will take storage much amend.
Question

How do you cut the 53-degree angle cuts with a Skilsaw?

The scale on a saw is reversed. 0 degrees is actually xc degrees. The angle you are looking to fix is 37 degrees.
Question

Is the coffin lid made from ane piece from peak to lesser?

About likely. Yous could theoretically split it up, but the lid is probably easiest to adhere in one piece, like the base.
Question

Could I slumber in the coffin?

You could, simply I don't recommend it.
Question

Would these angles exist the same if they were scaled down, or would that alter depending on size?

The angles will be the same, scaling down will just change the measurements and the finished size of the coffin.
Question

Approximately how much coin will I demand to practice this?

Information technology cost me $xxx for each 4 ten 8, the piano hinge was approximately $10, handle for the inside was $3, and glue and nails combined came to $7.
Question

How could I brand the lining for a bury?

I would recommend looking it upward on Google, but generally you'll want to cull the advisable material (similar cotton wool, silk, etc.) and so find a way to adhere it to the within of the coffin.
Question

How practice I brand a lining for a coffin?

Either cut thin wood strips or get sparse center molding (where 2 panels come together), with the fabric edge inside and most of it outside. Staple it though the molding, and then fold the fabric to the inside. For the bottom yous tin can use a large piece of Styrofoam and cover as you lot would a dinning chair seat, then gum it in the coffin with the sides folded under information technology.
Question

What is the depth of this coffin?

Gavin Donnelly

Community Reply

The depth is 1 foot deep. You could change the depth by making the sides taller or shorter.
Question

Are the measurements given to the within or exterior of the miter

Gavin Donnelly

Customs Respond

You volition have to cut the angles on the side pieces towards the within of the miter.